If the (Bluetooth connection available) icon is displayed on the screen but (remote commander mark) is not displayed, set
[Bluetooth Rmt Ctrl] to [On] and follow the on-screen instructions.
Note
When you initialize the camera, the pairing information is also deleted. To use the Bluetooth remote commander, perform pairing
again.
If the Bluetooth connection is unstable, remove any obstacles, such as people or metal objects from between the camera and the
paired Bluetooth remote commander.
The following functions cannot be used when [Bluetooth Rmt Ctrl] is set to [On].
Power-saving mode
If the function does not work properly, check the following notes and then try pairing again.
Ensure that the camera is either not connected to any other device or connected to only one device using Bluetooth
communication. (Up to 2 devices can be connected to the camera at the same time.)
Confirm that [Airplane Mode] for the camera is set to [Off].
If the function does not work properly even after you have performed the above operations, delete the pairing information for
the device that you want to connect using [Manage Paired Device] on the camera.
Related Topic
Bluetooth Settings
TP1001166645
5-054-865-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
