Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Functions for accessibility
The camera is equipped with functions for accessibility to serve as visual aids.
Screen reader function
The camera reads aloud information such as menu screens and messages.
To always enable the screen reader function, press and hold the MENU button on the initial setup screen displayed after
you turn the camera on for the first time. The screen reader function will be enabled.
Once you use the screen reader function on the initial setup screen, the screen reader function will be kept enabled after
the initial setup, and you can switch it on and off by pressing and holding the MENU button.
The MENU button is located on the rear side of the camera, to the right of the eyepiece part of the viewfinder,
immediately above the monitor, and is a horizontally long button.
Enlarge screen function
You can enlarge the menu screen display for better readability of the text. (Some menu screens do not support the
enlarging function.)
Select MENU →
(Setup) → [ Accessibility] → [Enlarge Screen] to enable the function. The menu screen display
will be enlarged when you press the custom key on the menu screen.
For details, refer to “ Enlarge Screen .”
Hint
If you did not use the screen reader function on the initial setup screen, you can enable the function from the menu. Select MENU
→
(Setup) → [ Accessibility] → [Screen Reader] → [Screen Reader] → [On].
If you did not use the screen reader function on the initial setup screen, [
Long Press to Switch] under [Screen Reader] will be
set to [Off]. Set [
Long Press to Switch] to [On] when you want to switch the screen reader function on and off by pressing and
holding the MENU button.
Note
Depending on the language you selected on the initial setup screen or in [
Language], the screen reader function may not be
supported.
Related Topic
Screen Reader (For some models only)
Enlarge Screen
TP1001275085
5-054-865-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
Need help?
General
