Help Guide
Interchangeable Lens Digital Camera
ILCE-7CM2 α7CII
Shooting still images (Intelligent Auto)
This section describes how to shoot still images in the [Intelligent Auto] mode. In the [Intelligent Auto] mode, the camera
automatically focuses and automatically determines the exposure based on the shooting conditions.
Set the Still/Movie/S&Q dial to
(Still) to select the still image shooting mode.
1
Set the mode dial to
(Auto Mode).
2
Select [Intelligent Auto] on the shooting mode selection screen.
The shooting mode will be set to
(Intelligent Auto).
3
Adjust the monitor angle, and hold the camera. Or look through the viewfinder and hold the camera.
4
When a zoom lens is mounted, enlarge images by rotating the zoom ring.
5
Press the shutter button halfway down to focus.
When the image is in focus, a beep sounds and the indicator (
, etc.) lights up.
6
To Next Page
Loading...
