Preparing the camera
37
Note
• The camera starts beeping if the battery pack is discharged during cleaning. Stop the
cleaning immediately and turn the camera off.
6 Use the blower to clean the image
sensor surface and the
surrounding area.
• Do not touch the image sensor with the
tip of the blower. Complete the
cleaning quickly.
• Hold the camera’s face downward to
prevent the dust from resettling in the
camera.
• When cleaning the image sensor, do not
put the tip of a blower into the cavity
beyond the lens mount.
7 Attach the lens and turn the camera off.
To Next Page
Loading...
