Using the shooting function
83
Selecting the drive mode
This camera has nine drive modes, such as single-shot advanced,
continuous advanced. Use them for your purpose.
• You can substitute the Fn button for the DRIVE button to set up on the
Quick Navi screen (page 48).
This mode is for normal shooting.
This is also used for canceling other drive modes.
1 Press the DRIVE button to display
the setup screen.
DRIVE button
2 Select the desired mode with v/V on the multi-selector, then
select the desired setting with b/B on the multi-selector.
Single-shot adv. (page 83)
Continuous adv. (page 84)
Self-timer (page 85)
Bracket: Cont. (page 85)
Bracket: Single (page 85)
WB bracket (page 87)
DRO adv. bracket (page 87)
Mirror lockup (page 87)
Remote Commander (page 88)
Shooting single shot
To Next Page
Loading...
