68
B/W Video Graphic Printer
UP-960CE
•Thermal video graphic printer with 256 steps of
gradation grey level
•
Large print size of 190 x 142 mm in standard mode
•High speed printing (approx. 12 seconds)
•Frame/Field memory selectable
•Printing direction selectable: Standard/Side/Reverse
•Positive/Negative printing
•Normal/Wide scan selectable
•4:3/1:1 aspect ratio selectable
•CCIR/EIA automatic selection
•Multiple copy function by pressing the “COPY” button
Rear Panel
Supplied Accessories
AC power cord (1)
Printing Paper Roll (UPP-210HD) (1)
Head cleaning sheet (1)
BNC cable (1.5m) (1)
Operation manual (1)
Optional Accessories
Foot Switch FS-20
High Density Printing Paper Roll UPP-210HD
Normal Density Printing Paper Roll UPP-210SE
Remote Control Unit RM-91
Specifications
UP-960CE
Printing method: Direct thermal printing
Thermal head: 1280 elements
Picture size:
(CCIR)
Standard mode: 190 x 142 mm (7
1
/2 x 5
5
/8 inches)
Side mode: 181 x 243 mm (7
1
/4 x 9
5
/8 inches)
(EIA)
Standard mode: 190 x 144 mm (7
1
/2 x 5
3
/4 inches)
Side mode: 184 x 243 mm (7
1
/4 x 9
5
/8 inches)
Gradations: 256 grey levels
Picture memory: 2048 x 1024 x 8 bit
Printing time: Approx. 12 seconds/screen
(at aspect ratio 4:3)
Input terminal:
VIDEO IN (BNC), CCIR/EIA Composite video signal
1.0 Vp-p, 75 Ω/high impedance (switchable)
Output terminal: VIDEO OUT (BNC) Loop through
Control terminal:
REMOTE (for the optional FS-20 foot switch or RM-91
remote control unit): Stereo mini jack
Power requirements: AC 220 to 240 V, 120 V, 50/60 Hz
Power consumption: 220 to 240 V: 1.3 A, 120 V: 2.4 A
Mass: Approx. 8 kg (17 lb 10 oz)
Dimensions:
Unit: mm (inches)
To Next Page
Loading...
