Sony CDP-C910 - Program Playback; Program Edit Function

DISC SKIP
“PROGRAM” is displayed.
osc
noona
aaagaa
e)
To program all selections on a disc in one step,
continue by choosing another disc.
3 Choose the Disc.
4 Press track number in the desired order.*
mi
OOD
Chosen selections
Current selection* otal playing time**
If you have programmed a selection number over
20, numeric of STEP is displayed instead of the
total time.
* To choose a selection number over 10 (or 20),
see page 11.
L
14
Designating the Playing Time
- Program Edit
[A] Choose selection and check the time.
b
Press e<> repeatedly to choose an appropriate
selection.
PROGRAM
(0023.2 5 6 7 8 9 W pa
M å
Dec TRACK.
Current selection Total time
[B] A satisfactory selection has been chosen.
S PROGRAM
(023232.425286 7; 8 9 t
(2)
The selection is stored, and the flashing numbers in
the window lights up.
To program additional selections from the same
disc, repeat step 4.
To program additional selections from another disc,
repeat steps 3 and 4.
6 If you program the selections for side B, insert a
pause.
"B" lights up.
Total time will return to 0.00”.
7 Program the selections for side B.
Repeat steps 3 to 4.
The selections for side A will
start playing.
** |t may take time for the total playing time of the
program to appear. Also, if the total playing time
exceeds one hour, the current selection indication will
be used to display the hour unit.