Sony CDP-C910 - Level File for Output Adjustment; Presetting Output Levels; Clearing Level File Settings

set the desired Output Level to a Disc
Using the level file function, you can preset the desired
output level for each disc. When a disc with the level file
is played, the PHONE LEVEL/LINE OUT LEVEL contro! on
the front panel is automatically adjusted to the preset
aogoaa level.
When you use the level file function, use headphones or
the amplifier connected to the variable line output jacks.
This function does not work for the output level of the
fixed line output and optical digital output jacks.
To preset a new level on to the current level file
Repeat steps 3 and 4.
Clearing the Level File Fi
1 Load the magazine with the disc that has the leve! file
you want to clear. Insert the magazine and choose that
disc with the DISC selectors or the DISC SKIP button.
2 Press LEVEL FILE. “LEVEL FILE” appears in the
display.
3 Press ERASE while the “LEVEL FILE” is displayed.
“FILE ERASE” is displayed and “CF LEVEL” goes off
trom the display window. The level file setting is cleared.
Adjust the level. You can also use LINE OUT
LEVEL buttons on the remote commander.
LEVEL FILE
a commu
A 000000009206
25