Sony CDP-C910 - Disc Memo Operations; Displaying Disc Memos; Clearing Disc Memos

Using the disc memo function, you can assign a name
within 10 letters for each disc. The memo appears in the
window every time you put the disc in the player.
One name can be assigned for one disc.
When the magazine is not loaded in the unit, you can also
assign a title for the "- NO DISC -" display (see page 9)
using the same procedure as that for the disc memo.
Usable letters and symbols
For the disc memo, 46 letters and symbols and a space
can be used. When the </> button is pressed for the
first time, the space appears. Each time > is pressed,
letters and symbols will appear in the following order.
(space) ABCDEFGHIJKLMNOPQRSTUVWX
YZ'&:.« > */+9876543210-
Use «€ to call up a previous character.
To rewrite letters or symbols
Before pressing FILE
Move the cursor under the letter/symbol to be changed
and then select the desired letter/symbol using <<4/> >
or letter buttons on the remote commander.
To erase the letter and make space, locate the desired
place with I«« >i and press CLEAR.
After pressing FILE
Repeat from step 2.
Note
Disc memos can also be changed while playing a disc by pressing
the MEMO INPUT button on the Remote Commander.
Displaying the Memos
To display the memo for the disc being played
Press TIME/MEMO twice during the shuffle, program or
bank mode and three times during the continuous mode.
To return to the normal display, press TIME/MEMO once
more.
—
N
Clearing the Disc Memo Fi
Load the magazine with the disc that has the disc
memo you want to clear. Insert the magazine and
choose that disc with the DISC selectors or the DISC
SKIP button.
When the disc memo appears, press 4<q/>> or
MEMO INPUT on the remote commander.
The blinking cursor will appear.
Press ERASE.
“FILE ERASE” is displayed and “CF MEMO” goes off
from the display window.
23