Sony CDP-C910 - Time Edit for Tape Recording; Designating Tape Side Length

Designating the Total Playing Time
- Time Edit
2 Choose the Disc.
Make sure that the total number of selections and
the total playing time are displayed. Then proceed
as follows in the stop mode.
3 |
& ODDOOOOOOH ™
ER ois
Se
Brinking
16
Designate the length of one side of your tape.
Example: a 46 minute tape
(23 minutes per side)
gue
CONTINUE
ds 0999099002993
Time
Press for “0”
You need not press keys for seconds, unless
required.
You can designate the tape length easily with the
I«4/»»1 buttons. Each time you press a button,
the time changes in the following way.
Press kaa : Press PP»
a —-—— --.~- —— C-46 oe)
C-74 37.- - —— C-60 30.- - —— C-54 27.- -
To set the seconds, press <<4/P., The time
increases or decreases by 10 seconds.
EDIT/TAAE FADE
The program for side A is completed.
If "LINK" blinks, see “To add selection(s)".
Chosen selections
«PROGRAM
@O23 4567890
Dec
i
Tack
Current selection Total playing time
z=
Press EDIT/TIME FADE once more, to make a
program for the other side of your tape. If “LINK”
blinks, see “To add selection(s)”.
Note
Total playing time can be set from 10 seconds up to 59 minutes
59 seconds.