Sony CDP-C910 - Tape Editing Features; Fade In;Fade Out; Time Fade Function

Convenient
Features
for
Tape
Recording
The following functions are convenient for editing your own
tapes.
Time Fade and Fade in/Fade out cannot be operated
when the DIGITAL (optical) OUT is used for connections.
Fading in/Fading out
You can have the play fade in and fade out between 2-10
seconds.
When no time is specified, the play will fade in and fade
out for 5 seconds.
To set the fade time
1 Press B
2 Press FADER. "FADE 5 SEC" will appear in the display
window. The actual fade time “5” will be flashing.
3 Press <<4/PP to select fade time between 2-10
seconds.
4 Press FADER.
To end the play fading out
Press FADER when you want to start fading out.
(^) flashes in the window, and play fades out and unit
enters the pause mode.
To restart the play fading in
Press FADER in the pause mode.
(su)
flashes
in
the
window,
and
play
fades
in.
18
Fading out after a desired
duration - Time Fade
You can have the play fade out at the end by designating
the play duration. Once time fade is set, it functions twice
for editing both sides of a tape. You can change discs
without canceling this function. The fade time is preset to
5 seconds, but you can change it between 2-10 seconds.
To set time fade
1 Press EDIT/TIME FADE twice during stop.
TIME
FADE
n= Jis displayed in the window.
2 Set the desired play duration, using numeric buttons.
e.g. To set to 27 minutes, press [2][7][10][10] .
You need not press buttons for seconds, unless
required.
You can designate the tape length easily with the
Haa Pri buttons. Each time you press a button, the
time changes in the following way.
Press Kd Press P»
p C-90 45.- - ---- C-46 23.- - 7
C-74 37.--——-C-60 30.- - —— C-54 27.- -
To
set
the
seconds,
press
<<4/.
The
time
increases
or
decreases
by
10
seconds.
Note
The
desired
play
duration
can
be
set
from
10
seconds
up
to
59
minutes 59 seconds.
3 Press EDIT/TIME FADE.
4 To start play, press P».
After
the
designated
time,
play
fades
out
and
pauses.
Tape
side
B
lights
up.
Press
M
or
»
to
resume
playing
for
the
other
side
of
the
tape.
If
you
press
FADER,
fade
in
will
start.
When
the
play
fades
out
for
the
second
time, the unit pauses and the time fade function is
canceled.
When
playback
ends
in
the
duration
of
time
fade
Time
fade
function
will
be
kept
on.
Change
the
disc
and
start
playback
automatically
when
the
total
playing
time
is
within
some
seconds
before
the
designated
time,
the
player
fades
out.
To cancel time fade
Time fade will be canceled when
— EDIT/TIME FADE is pressed once again.
-
</>
(manual
search)
is
pressed
during
play.
To display the time remaining until the time set
Press TIME/MEMO twice.
If
the
P.SEARCH
is
pressed
after
setting
time
fade,
time
fade
is
released
but
peak
search
is
kept
active.