Sony CDP-C910 - Program Bank Storage; Memorizing Programs (Bank); Playing and Clearing Banks

Keeping the Program in Memory - Bank
Press BANK and the “BANK” indicator will turn on.
3 Choose the disc.
Doooo
poooo
C)
4 Program the selections as your desire. (See page
14) Press BANK instead of PROGRAM for steps 2
and 4.
>>
A
Lights up
» BANK
= O@OOOODOO®@ ir)
("- FILE -" will disappear approximately one
second later.)
L
24
After programming selections, you can keep the program
memorized, so that the disc is played always in the fixed
order. The memorized program is called "bank."
Memorizing a Bank
The program is stored into the memory. (One disc can
memorize up to 24 programs.) Only one bank can be
made for a disc.
Notes
* You cannot program a whole disc under a single program
number.
* To pause during the bank play, press If instead of step 4.
* |f you press a DISC 1-10 buttons during the stop mode, the
bank stored for the disc is displayed.
Playing the Disc Using the Bank
1 Insert discs into the magazine and set the magazine into
the unit.
2 Press BANK to choose whether to play "1 DISC" or
“ALL DISCS”.
3 If you have any disc that you want to play before playing
the bank, or if you want to play in the 1 Disc mode,
choose the applicable disc.
appears in the display.
4 Press » to start play. When playing in the ALL DISCS
mode, any disc without a bank file will be played in its
entirety.
Clearing the Bank A |
1 Load the magazine with the disc that has the bank you
want to clear. Insert the magazine and choose that disc
with the DISC selectors or the DISC SKIP button.
2 Press BANK.
3 Press ERASE.
“FILE ERASE” is displayed and “CF BANK" goes off
from the display window. The bank is cleared.