•
Adjusting
setup
items
-
SET
1 Press and
hold
(SELECT/ENTER).
The setup display appears.
2 Press
(SELECT/ENTER)
repeatedly
until
the
desired
item appears.
3 Rotate
the
control
dial
to
select
the
setting
(example
"ON"
or
"OFF").
4 Press and
hold
(SELECT/ENTER).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and
setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 7)
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A*1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF"
A.OFF (Auto Off)
Shuts
off
automatically after a desired time
when the unit
is
turned off: "NO," "30S
(seconds)," "30M (minutes),"
"60M
(minutes)."
DEMO (Demonstration)
Activates the demonstration: "ON
,"
"OFF."
DIM
(Dimmer)
Changes the display brightness.
- "AT": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
- "ON": to dim the display.
- "OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast
of
the display.
The
contrast
level is adjustable
in
7 steps.
ILM (Illumination)
Changes the illumination color:
"ILM-I
,"
"ILM-2."
M.DSPL (Motion Display)
Selects the Motion Display mode.
- "LM": to show moving patterns and level
meter.
- "ON": to show moving patterns.
- "OFF": to deactivate the Motion Display.
MONO*2 (Monaural mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFF."
Z.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
- "Z.TIME-I (6 seconds)," "Z.TIME-2
(9
seconds)," "Z.TIME-3 (30 seconds)."
LPF (Low Pass Filter)
Selects the subwoofer cut-off frequency: "OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
LPF NORM/REV (Low Pass Filter Normal!
Reverse)
Selects the phase when the LPF is on: "NORM,"
"REV."
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
BTM (page
12)
*I When the unit is turned
off.
*2 When FM is received.
Memory
backup
Your last settings are stored automatically.
Sound settings (except volume), setup items
(except clock) and tuner presets are stored in the
internal memory
of
the unit.
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
LOCAL (Local seek mode)
- "ON": to only tune into stations with stronger
signals.
18
-"OFF": to tune normal reception.
----------"---
To Next Page
Loading...
