Error displays/Messages
CHECKING
The unit
is
confirming the connection
of
a USB device.
- Wait until confirming the connection is finished.
ERROR*l
o The disc
is
dirty
or
inserted upside down.
*2
- Clean or insert the disc correctly.
o A blank disc has been inserted.
o The disc cannot play due to a problem.
- Insert another disc.
o USB device was not automatically recognized.
- Reconnect it again.
o Press
~
to remove the disc.
FAILURE (Illuminates until any button
is
pressed.)
The connection
of
speakers/amplifiers
is
incorrect.
- See the installation/connections manual
of
this
model to check the connection.
FAILURE (Illuminates for about I second.)
When the SAT tuner
is
connected, storing an SAT
radio channel into a preset failed.
- Be sure to receive the channel that you want to
store, then try
it
again.
LOAD
The
CD
changer
is
loading the disc.
- Wait until loading is complete.
L.
SEEK
+/-
The local seek mode
is
on during automatic tuning.
NO DEV (No Device)
(SOURCE)
is
selected without a USB device
connected. A USB device
or
a USB cable has been
disconnected during playback.
- Be sure to connect a USB device and USB cable.
NO DISC
The disc is not inserted
in
the
CD
changer.
- Insert discs
in
the CD changer.
NO
MAG
The disc magazine
is
not inserted
in
the
CD
changer.
- Insert the magazine in the
CD
changer.
NO MUSIC
The disc
or
USB device does not contain a music file.
-Insert
a music CD
in
this unit or
an
MP3 playable
CD changer.
-Connect
a USB device with a music file
in
it.
NO NAME
A disc/album/artistltrack name is not written
in
the
track.
NO SUPRT (Not Support)
o USB hub is not supported on this unit.
o The connected USB device is not supported.
- For details
on
the compatibility
of
your USB
device, visit the support site.
OFFSET
There may be an internal malfunction.
-Check
the connection.
If
the error indication
remains on in the display, consult your nearest
Sony dealer.
OVERLOAD
USB device is overloaded.
- Disconnect the USB device, then change the source
by pressing
(SOURCE).
- Indicates that the USB device
is
out
of
order,
or
an
unsupported device
is
connected.
READ
The unit is reading all track and album information on
the disc.
- Wait until reading
is
complete and playback starts
automatically. Depending on the disc structure,
it
may take more than a minute.
RESET
The
CD
unit.
CD
changer
or
USB device cannot be
operated due to a problem.
- Press the RESET button (page 6).
"L
L L
L"
or
"-,
-,-,
-,
"
During reverse
or
fast-forward, you have reached the
beginning
or
the end
of
the disc and you cannot go any
further.
The character cannot be displayed with the unit.
*I
If
an error occurs during playback
of
a
CD,
the disc
number
of
the CO does not appear in the display
*2 The disc number
of
the disc causing the error
appears in the display
If
these
solutions
do
not
help
improve
the situation,
consult
your
nearest
Sony
dealer. _
If
you
take
the
unit to
be
repaired
because
of
CD
playback
trouble,
bring
the
disc
that
was
used
at
the
time
the
problem
began.
25
To Next Page
Loading...
