EasyManua.ls Logo

Sony CDX-H910UI - Troubleshooting Specific Issues; Playback and Display Problems; Functionality and Reception Issues; USB Playback Issues

Sony CDX-H910UI
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
During playback or reception, demonstration
mode starts.
If no operation
is
performed for 5 minutes with
"DEMO-ON"
set, demonstration mode starts.
- Set
"DEMO-OFF"
(page 18).
The display disappears from/does not appear
in
the display window.
o The dimmer is set
"DIM-ON"
(page 18).
o The display disappears if you press and hold
(OFF).
- Press and hold
(OFF)
on the unit until the
display appears.
The Auto Off function does not operate.
The unit
is
turned on. The Auto
Off
function activates
after turning
off
the unil.
- Turn off the unit.
ybac;k
."
The disc cannot be loaded.
o Another disc
is
already loaded.
o The disc has been forcibly inserted upside down or
in
the wrong way.
The disc does not playback.
o Defective or dirty disc.
o The CD-Rs/CD-RWs are not for audio use (page
21
).
MP3IWMAJAAC files cannot be played back.
The
disc
is
incompatible with the MP3IWMA/AAC
format and version. For details on playable discs and
formats, visit the support site.
MP3IWMAJAAC files take longer to play back
than others.
The
following discs take a longer time to start
playback.
- a disc recorded with a complicated tree structure.
- a disc recorded
in
Multi Session.
- a disc to which data can be added.
The display items do not scroll.
For discs with very many characters, those may not
scroll.
"A.SCRL"
is
set to "OFF".
- Set "A.SCRL-ON" (page 18)
- Press and hold
(DSPL)
(SCRL).
The sound skips.
o Installation is not correcl.
-Install
the unit at an angle
of
less than 45°
in
a
sturdy part
of
the boal.
Defective or dirty disc.
The operation buttons do not function.
The disc will not eject.
Press the RESET button (page 6).
,-./.,--.:.:
..
,
.
The stations cannot be received.
The sound
is
hampered by noises.
The connection
is
not correct.
- Connect a power antenna (aerial) control lead
(blue) or accessory power supply lead (red) to the
power supply lead
of
a boat's antenna (aerial)
booster (only when your boat has built-in FM/AM
antenna (aerial)
in
the rear/side glass).
- Check the connection
of
the boat antenna (aerial).
-If
the auto antenna (aerial) will not go up, check the
connection
of
the power antenna (aerial) control
lead.
Preset tuning is not possible.
o Store the correct frequency
in
the memory.
o
The
broadcast signal
is
too weak.
Automatic tuning is not possible.
o Setting
of
the local seek mode
is
not correcl.
- Tuning stops too frequently:
Set
"LOCAL-ON"
(page 18).
- Tuning does not stop at a station:
Set
"LOCAL-OFF"
(page 18).
The broadcast signal is too weak.
- Perform manual tuning.
During
FM
reception, the "ST" indication
flashes.
o Tune in the frequency accurately.
o
The
broadcast signal is too weak.
- Set
"MONO-ON"
(page 18).
An
FM
program broadcast
in
stereo
is
heard
in
monaural.
The unit is
in
monaural reception mode.
- Set
"MONO-OFF"
(page 18).
You
cannot play back items via a USB hub.
This unit cannot recognize USB devices via a USB
hub.
Cannot play back items.
A USB device does not work.
- Reconnect
it.
The USB device takes longer to play back.
The USB device contains files with a complicated tree
structure.
A beep sounds.
During playback, the USB device has been
disconnected.
- Before disconnecting a USB device, make sure to
stop playback first for data protection.
The sound is intermittent.
The sound may be intermittent at a high-bit-rate
of
more than 320 kbps.

Other manuals for Sony CDX-H910UI

Related product manuals