66
GB
, The system may be under the influence of static
electricity or other factors. In this case, restart the
system. If the system still works poorly, reset the
system (page 66).
, If a warning message appears, do as the message
says.
, The unit’s internal system may be malfunctioning, or
the system may be suffering from strong electrical
noise caused by power supply abnormalities due to
being dropped, excessive static electricity, or
lightning. In this case, unplug the power cord, wait
about 30 seconds, and then plug the power cord
again.
To check the copyright protection
This system cannot play back files in WMA format
with DRM copyright protection. If a WMA file
cannot be played back on this system, check the
property of that file on your computer to see
whether the file is DRM-copyrighted.
Open the folder or volume where the WMA file is
stored and right-click the file to display the
[Properties] window. If there is a [License] tab, the
file is DRM-copyrighted and cannot be played
back on this system.
To reset the system to the factory settings
If the system still does not operate properly, reset
the system to the factory settings.
Use the buttons on the unit to reset the system to its
factory default settings.
1
Unplug and re-plug the power cord, and
then turn on the system.
2
While holding down x, hold down ?/1 until
“RESET” appears.
All user-configured settings, such as network settings,
preset radio stations, timer, and the clock, are deleted.
Others
The system works poorly.
The system does not respond to any
operations. The system does not work
correctly.
To Next Page
Loading...
Need help?
General
