Using _he mem_
Usingmenuitems
&/V/4/I_ button
• button
Mode switch
--MENU button
-- Control button
1Turn on the power and set the mode switch.
DiLl_renl items are available depending on the position ol tile mode switch and the a (_'anlera) menu
setlings.
2 Press MENU to display the menu.
3 Select the desired menu item with <1/_
on the control button. _lllI_
I a [] _> L_ WBIgR'gJ>
• If the desired item is invisible, keep pressing _/_
until file iteln appears on the screen.
• Press • after selecling an ilem when the mode
swilch is set 1o [_.
4 Select the setting with A/T.
The setting you select is zoonled andis set,
5 Press MENU to turn off the menu.
• It there is an item that is not displayed, an _ mark appears on the edges ol the location where menu
items usually appear. To display an item thal is not displayed, select the mark with the control button.
• Votl cannot selecl items that are grayed otlt,
26
To Next Page
Loading...
