Printingimagesdirectlyusinga PictBridge
compliantprinter
Even if you do not hax e a computer, you
can print images shot using your camera by
connecting tile camera directly to a
PictBridge compliant printer.
_l_PictBridge
• "PictBrklge" is based ontilt?CIPA stilndiLrd.
(CIPA:Camera & Imaging Products
Association)
Insingle-imagemode
You can print a single image on a printing
sheet.
In indexmode
You can print sever:d images at a reduced
size on a printing sheet. You can print a set
of either tile same images (@) or different
images (@).
® ®
Prepare the camera to connect it to tile
printer with the cable lk)r multi-use
terminah When connecting the camera to a
printer that is recognized when [USB
Connect] is set to [Auto], Stage 1 is
unnecessary.
Index button
--MENU button
-- Control Button
• It is recomnlended m use a lhlly chargedballelT
pack or an AC Adaptor(notsupplied) to prevenl
tilepower fl'om turning ofl partway lhrough
printing,
1 Press MENU to display the menu.
2 Press _ on the control button to
select _ (Setup).
3 Select [_] (Setup2) with V, then
select [USB Connect] with _J_r/_.
• An index prim function may nol be provkled
depending onthe printer.
• Tilequantity of iln;_gesthat can be printed as an
index image diflcr depending onthe printer.
• YOU cannot print m(wics.
• If the _* indicator flashes on the screen of file
canlt?ra for abouI live _conds (error
notificalk)n), check lilt? connected prinler.
/I
HI"Select [PictBridge] with b./A, then
press O.
The USB mode is set.
7O
To Next Page
Loading...
