Connect the multi connector on your
camera and the USB jack on the
printer with the supplied cable for
multi-use terminal.
Turn on your camera and the printer.
After the connection is made,
the ?'{ indicator appears.
@ To the multi
connector
@ To the for multi-use
USB jack terminal (supplied)
• Set the switch on the supplied cable tot mulli-
use terminal to "CAMERA".
The camera is set le playback mode, then an
image and tile print menu appear en tile
screell.
Regardless of what tile mode switch is set
le. the print menu appears when you
complete Stage 2.
Select the desired printing
method with A/T on the control
button, then press 0.
[All In This Folder]
Prints all tile images in the folder.
[DPOF image]
Prints all tile images with a _ (Print
order) mark (page 74) regardless of the
displayed image.
[Select]
Selects images and prints all tile
selected images.
@Select the image you want to print with
_l/l_, then press O.
Tile _/ mark appears on the selected
image.
• To select other images, repeal this
procedure,
@Select [Print] with T. then press O.
71
To Next Page
Loading...
