Setup2 For detai/s o, the operatio, _ page 44
2
The default settings are marked with _.
Selects the method used to assign file numbers to images.
Series Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick Duo" is changed. (When the
replaced Memo13 Stick Duo" contains a file with a numher
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Reset Starts from 0001 each time the lk)lder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable lk_r multi-use terminal.
PietBridge Connects the camera to a PictBridge compliant printer
(page 70).
PYP When[PTP](Picture Transli:r Protocol) ix set and the camera
ix connected to a computer, the images in the recording lblder
on the camera am copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Mass Storage Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 59).
Auto The camera recognizes automatically and scls up
communication with a computer or PictBridge compliant
printer (pages 59 and 70).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge ].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the _tting to [Mass
Storage].
53
To Next Page
Loading...
