gom_edifl_ _?o_g camera _oVo_r TV
Viewing images on a TVscreen
You Call view images on ,_tTV screen by
connecthtg tile camera to a TV.
Turn elf bolh your camera and the TV
before connecthtg the camera and the TV.
4
/ Use the cable for multi-use
terminal (supplied) to connect the
camera to the TV.
@ To audio/video
input jacks
@ To the multi
connector
Cable for multi-use
terminal (supplied)
• Place tile canlera with tile screen lacing
upwilrds.
• If your TV has stereo input jacks, connect tile
audio plug (black) of tile cable lor multi-use
terminal to tile left audio jack.
rj
O Turn on the TV and set the TW
video input switch to "video."
• For details, _e the operating instructions
supplied with tile TV.
,/I
=t. Set the mode switch to _, and
turn on the camera.
Mode switch
Control button
Images shot with the camera appear on
the TV screen.
Press 411_. on the control button to
select the desired image.
• When using yourcamera abroad, il may be
necessaW to switch tile video signal oulput
to nlatch that of your TV system (page 54).
Set the switch on the cable for
multi-use terminal to "TV".
76
To Next Page
Loading...
Need help?
General
