Enable printer to connect
• [USB Connect] is set to [PictBridge],
however the c_lnlela is connl:cted to a
non-PictBridge compliant device.
Check the de'rice.
• The connection is not established.
Disconnect and connect the cable for
multi-use terminal again. If an error
message is indicated on the printer, refer
to the operating instructions supplied
with the printer.
Connect to PictBridge device
• Youtried to print imagesbeforethe
printer connection _as established.
Connect to a PictBridge compliant
printer.
No printable image
• Youtried to execute [DPOF image]
without placing a DPOF lPrint order)
mark on the image(s).
• Youtried to execute [All In This Folder]
while a folder that holds only movies
was selected. You cannot print movies.
Printer busy
Paper error
No Paper
Ink error
Low Ink
No Ink
• Check the printer.
Printer error
• Check Ihe printer.
• Check if the image you want to print is
corrupted.
• The data transmission to the printer may
not be completed yet. Do not disconnect
Ihe cable for multi-use terminah
Processing
• The printer is canceling the current print
job. You cannot print until it is finished.
This may take time, depending on the
printer.
g2
To Next Page
Loading...
