Sony DCR- - Setting the Ir Setup Code

100
EASY DUBBING
SETUP
I R SETUP
PAUSE MODE
I R TEST
RETURN
3
00:00:0
EASY DUBBING
SETUP
I R SETUP
PAUSE MODE
I R TEST
RETURN
3
00:00:0
NORMAL
NORMAL
1
[
EASY DUB
]:
END
[
EASY DUB
]:
END
Dubbing a tape easily – Easy Dubbing
Buttons for canceling recording pause on the VCR
The buttons vary depending on your VCR. To cancel recording pause:
– Select PAUSE if the button to cancel recording pause is X.
– Select REC if the button to cancel recording pause is z.
– Select PB if the button to cancel recording pause is N.
(2) Setting the IR SETUP code
1 Turn the SEL/PUSH EXEC dial to select IR SETUP, then press the dial.
2 Turn the SEL/PUSH EXEC dial to select the IR SETUP code of your VCR,
then press the dial.
Check the code in “About the IR SETUP code” (p. 101).
CCD-TRV418