264
Identifying parts and controls
6
5
2
q;
8
Remote Commander
The buttons that share the same name on the Remote Commander and your camcorder
function identically.
5
4
3
2
1
0
8
9
7
6
RMT-814
RMT-708
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the + and – polarities on the batteries to
the + – marks inside the battery compartment.
1 PHOTO button (p. 53, 56, 132)
2 DISPLAY button (p. 47)
3 SEARCH MODE button (p. 90, 92)
4 ./> buttons (p. 90, 92)
5 Video control buttons (p. 45, 49)
6 Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the camcorder.
7 ZERO SET MEMORY button (p. 89, 124)
8 START/STOP button (p. 30)
9 DATA CODE button (p. 47)
0 Power zoom button (p. 34)
Notes on the Remote Commander
•Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not function properly.
•Your camcorder works in the commander mode VTR 2. The commander modes
1, 2 and 3 are used to distinguish your camcorder from other Sony VCRs to avoid
unintentional operations. If you use another Sony VCR in the commander mode
VTR 2, we recommend changing the commander mode or covering the sensor of the
VCR with black paper.
RMT-814
RMT-708
To Next Page
Loading...
Need help?
General
