97
Editing
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Note on tapes that are recorded in the Hi8 /standard 8 mm system
The picture may fluctuate. This is not a malfunction. Digital signals are output as image
signals from the DV jack during playback.
You can connect one VCR only using the i.LINK cable
See page 244 for more information about i.LINK.
Pictures processed by the following functions cannot be output through the DV
jack:
– Digital effect
– Tape PB ZOOM
– Picture effect
If you record paused playback picture with the DV jack
The recorded picture becomes rough. Also, when you play back the picture using other
video equipment, the picture may jitter.
When you connect using an i.LINK cable
You cannot dub the titles and display indicators.
Dubbing a tape
To Next Page
Loading...
