74
Chapter 3 Menu
Chapter 3 Menu
Menu Windows
CUE Window
To open this window, touch the CUE button on the
bottom menu bar. This window allows you to control
the cue function.
For detailed information on cue operation, see page 106.
0 CUE list
qa TC LINK buttons
qd NUMBER buttons
qf EFFECTIVE CHANNEL buttons
qg EVENT NAME display
1 Page select button
2 Row select button
1 Page select button
Touch this button to move the CUE list 0 up or down
by 10 rows.
2 Row select button
Touch this button to move the CUE list 0 up or down
one row at a time.
3 LOCATE button
To locate the selected machine to a cue timecode,
select the cue by touching it on the display and then
touch the LOCATE button.
4 CYCLE function buttons
The tape recorder plays back the specified duration
repeatedly in the selected CYCLE manner.
Locate the start point of the cue
(LOCATE TIME – preroll time)
Playback after locating
Return to the start point of the cue, after arriving at
the end of the cue (CYCLE END + postroll time)
3 LOCATE button
5 NEW button
6 STORE button
7 DELETE button
8 RECALL button
9 UNDO button
qs EVENT buttons
NUMBER button
TIME CODE button
4 CYCLE function buttons