Sony DSLR-A100 - Page 136

Your camera does not work.
• Use the type of battery pack you can use _ith this camera (page 142).
• The battery lexel is low (The 4Z7] indicator appears). Charge Ihe battery pack (4 step 1 in
"Read This FD:st' ).
The lens gets fogged.
• Moisture condensation has occurred. Turn oil"the camera and leave it l_)rabout an hour before
using it (page 147).
The message "Set date and time?" appears when you turn on the camera.
• The camera has been Icfl unused for sometime with a lo_xbattel3 or no battery pack. Change
Ihebattery pack and set the elate again (4 step 3 irl "Read This First '). If the date sclting is
lost every time the battery pack is chang(d, consult your Sony dealer or local authorized golly
service facility.
The number of recordable images does not decrease or decreases two at a
time.
• This is because the compression rate and the image size afler compression change depl:nding
on the image when you shoot with a JPEG image (page 83).
The setting is reset without the resetting operation.
• Thebattel3 packwasremoxcd x_hcnthe POWER sx_itchx_asselto ON. When removing the
hattel3' i_ack>make s/ire the POWER sx_itch is set to OFF and tile access lamp is not
ilhlminated (_ swp 1 irl "Read This Firat').
The camera does not work properly.
• Turn off the camera.Removethe battery packand insertit again.If an AC Adaptor/charger
(not supplied) is used, disconnect the power cord. If the camera is hot, allow it to cool dox_n
before tuing this corrective procedure.
The five bars of the Super SteadyShot scale flash.
• TheSuperSteadyghotfimction doesnot x_ork.Youcan continueto shootbut tile Super
SteadyShot function x_ill not _xork.Turn the camera oil"and on. If the Super SteadyShot scale
continues to flash, consult your Sony dealer or local authorized Sony service hlcility.
136