• High speed sync mode is not _c_'ailable when tim two-second sell:-timer or [Rear sync.] is selectcd.
• If a flash meter or a color meter is used. high speed sync mode is not available because the proper
exposure cannot be attained. Either deactivate the high speed sync mode ("HSS" does not appear on the
LCD window of the flash) or _lect a shutter speed slower than the flash sync speed.
FDA-AIAMAngleFinder/FDA-MIAMMagnifier
When using the Angle Finder or M_nifier. remove the eyecup.
• Tbe eyepiece sensors located below tile viewfinder may be activated. Setting [Eye-Start AF] to [Off] is
recommended (page 85).
146
To Next Page
Loading...
