To attach the eyepiece cover
When the shutter is released without the use ot tile viewfinder, as in bulb exposure or shooting with the
sell-lilncr, altach the eyepiece cover to prevent light hom enlering lhrough lhe viewtlnder and altPcting
the exposure.
(!) Carefidly slide the eyecup off by pushing on each side of the eyecup.
@ Slide the eyepiece cover ever the vie_finder. The cover is normally attached to the shoulder
strap.
• When attaching the eyepiece c(wer, the eyepiece sensors located below tile viewfinder may be activated
depending on the silualion, and lhe ti_cus may be adjusted or the LCD monitor may continue 1oflash.
Selling [Eye-Slarl AF] 1o [Off] prevents this problem (page 85).
g
41
To Next Page
Loading...
