Sony FMP-X10 - Performing Basic Checks

FMP-X10 19
SECTION 3 - UPDATES AND ADJUSTMENTS
PERFORMING BASIC CHECKS
After Updating and Servicing the 4K Media Player, the following Basic Checks must be perfomed before returning the unit to the customer.
ITEM SUB-ITEM FUNCTION USE CASE FOR SERVICE
001 OP 000 VER Version informaon for Soware 1) Check Soware version aer version up.
000 TEST_PATTERN
Output video test paern (color bar) from
ICXXXX to HDMI output via IC
Check video signal path from ICXXXX to HDMI
Output when no picture
001 FACT_SETTING Inialize all sengs to default Condion.
Perform Factory Seng aer repairing the unit or
operate normal user interface
004 NETWORK Check and indicate Network Condion.
Check Network Condion aer seng the
Network Setup. (MAC Adress and other status).
003 DIG_SRV_MODE
009 HDD 001 SMART Diagnosis tool for HDD Condion. Check HDD condion before PC tool.
BASIC CHECKS CHART