Sony FMP-X10 - Network Test

FMP-X10 22
SECTION 3 - UPDATES AND ADJUSTMENTS
10. Press (Down arrow) twice and then (Enter button)
to select the *3 Boot Counter Reset option.
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
11. Press (Enter button) as required on screen.
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Press enter
12. The Boot Counter Reset nal screen will appear as shown:
DIGITAL (DIG_SRV_MODE) SERVICE
FACTORY SETTING
1 Shipment Setting
2 Boot Counter
* 3 Boot Counter Reset
Boot Count Reset is done
NETWORK TEST
1. After accessing Service Mode, press (Cue button) until
the 004 NETWORK item shows on screen.
DIGITAL SERVICE
003 DIG_SRV_MODE
004 NETWORK
2. Press (Play button) to enter the 004 NETWORK item.
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
3. Press (Enter button) as required on screen.
DIGITAL (DIG_SRV_MODE) SERVICE
NETWORK
*1 Display Information
Press enter
4. Network information screen will appear as shown:
DHCP
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
MAC Adress
LINK
: OFF
: 192.168.0.11
:
:
:
:
: D8:12:56:98:CF:22
: OFF