MICROFILM
SERVICE MANUAL
MINI Hi-Fi COMPONENT SYSTEM
US Model
Canadian Model
HCD-RX66
E Model
Australian Model
HCD-GRX5
Model Name Using Similar Mechanism HCD-H991AV
CD Mechanism Type
CDM38L-5BD29AL/
CDM38LH-5BD29AL
Base Unit Type BU-5BD29AL
Optical Pick-up Type KSS-213D/Q-NP
Model Name Using Similar Mechanism NEW
Tape Transport Mechanism Type
TCM-230AWR1/
230PWR1
HCD-GRX5/RX66
HCD-GRX5/RX66 is the Amplifier, CD
player, Tape Deck and Tuner section in
MHC-GRX5/RX66.
Photo: HCD-RX66
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol a are trade-
marks of Dolby Laboratories Licensing Corporation.
CD
Section
TAPE
DECK
Section
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from 70 - 20,000 Hz; rates 60
watts per channel minimum RMS power, with no more than 0.9% total
harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Canadian model:
Continuous RMS power output (reference)
60 + 60 watts
(6 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 45 W)
Other models:
The following measured at AC 110, 220 V 50/60 Hz
DIN power output (rated) 50 + 50 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
65 + 65 watts
(6 ohms at 1 kHz, 10% THD)
The following measured at AC 120, 240 V 50/60 Hz
DIN power output (rated) 60 + 60 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
75 + 75 watts
(6 ohms at 1 kHz, 10% THD)
Peak music power output (reference)
1000 watts
Inputs
MD/VIDEO IN: voltage 450 mV,
(phono jacks) impedance 47 kilohms
MIX MIC: (phone jack) sensitivity 1 mV, impedance 10
kilohms
– Continued on next page –
To Next Page
Need help?
General
