Sony HCD-L1 - ENCODER Board, D.sensor Board; RTL Pulley Assy

15
HCD-L1
3-13. ENCODER Board, D.SENSOR Board
3-14. RTL Pulley Assy
1 screw (+PWH,2X6)
3 screw
(+BTP M 2.6 × 6)
2 ENCODER board
4 D.SENSOR board
1 claw
3 RTL pulley assy
2
2
RTL pulley assy
Disengage the claw and rotate the RTL pulley assy in the direction of , and
remove your hands at the position where the shaft agrees with the hole shape on the
chassis.