Sony HCD-LX7 - CD Mechanism Deck; Base Unit; Disc Table

13
3-6. CD MECHANISM DECK 3-7. BASE UNIT
3-8. DISC TABLE
Note:
When the disc table is installed, adjust the positions of
roller cam and mark B as shown in the figure, then set to
the groove of disc table.
1Five screws (BVTP3x8)
2CD mechanism
deck
3Base uni
t
1Yoke fitting
2Boss
A
A
2Screw (BVTP3X8
1Screw (BVTP3X8)
4Stop screw
5Disc table
3Bracket (BU)