24
6.4. HDD Hardware Test
1. Set the mode dial “HDD Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 14 ] HDD hardware test.
Operation specifications
Indication contents
• HDD hardware test display
Display the HDD hardware test result information.
• The error cord contents which are displayed
Push the menu button to end the service mode, and then POWER OFF.
Error code Function
NO ERROR It is normal without the error
CTR ERROR Controller Resistor Error
BUFF RAM ERROR Buffer RAM Error
ECC DEV ERROR ECC device Error
CPU ERROR CPU RAM/ROM Error
COMMAND Reserved
To Next Page
