25
7 Service Fixture & Tools
7.1. When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.2. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No. Parts No. Connection Form
1 RFKZ0379 PS6001 (MAIN) - HDD UNIT 40PIN 0.5 B to B
2 RFKZ0446 PS6003 (MAIN) - CCD FPC 50PIN 0.4 B to B
3 RFKZ0448 FP6002 (MAIN) - LENS UNIT 33PIN 0.3 FFC
4 RFKZ0343 PP6002 (MAIN) - PP6401 (FLASH) 30PIN 0.5 B to B
5 RFKZ0446 FP6001 (MAIN) - FP6502 (SIDE(R)) 29PIN 0.3 FFC
6 VFK2020 PS6101 (SUB) - POWER FPC 20PIN 0.5 B to B
7 VFK1175 FP6402 (MAIN) - REAR CASE FPC 16PIN 0.5 FFC
To Next Page
