Sony HVR-V1E - Page 45

45
HVR-V1E/V1P
2-887-521-12(1)
L:\SONY\PV\CX91030\1130insatuPDF\2887521121_GB\2887521111HVRV1UVIN\01GB05BAS.
fm
Recording/Playback
1 During standby, press the
PICTURE PROFILE button C.
2 Select a picture profile number by
turning the SEL/PUSH EXEC dial
A, then press the dial.
You can shoot with the settings of the
selected picture profile.
3 Select [OK] by turning the SEL/
PUSH EXEC dial A.
To cancel the picture profile recording
Select [OFF] in step 2, then press the SEL/
PUSH EXEC dial A.
To change the picture profile
You can change the settings in [PP1]
through [PP6].
1 Press the PICTURE PROFILE button
C.
2 Select the PICTURE PROFILE number
by turning the SEL/PUSH EXEC dial
A, then press the dial.
3 Select [SETTING] by turning the SEL/
PUSH EXEC dial A, then press the
dial.
4 Select an item to be adjusted by turning
the SEL/PUSH EXEC dial A, then
press the dial.
5 Adjust the picture quality by turning the
SEL/PUSH EXEC dial A, then press
the dial.
PP6
:------
You can assign your own
setting.
Picture profile
number (setting
name)
Recording condition
Item Adjustment
[COLOR
LEVEL]
–7 (low) to +7 (high)
–8 (black and white)
[COLOR
PHASE]
–7 (greenish) to +7
(reddish)
[SHARP-
NESS]
0 (softer) to 15 (clearer)
[SKINTON
E DTL]
To make wrinkles less
noticeable by suppressing
the outlines on the part of
skin color.
[TYPE1] (the color range
recognized as a skin color
is narrow) to [TYPE3] (the
color range recognized as
a skin color is wide)
[OFF] no adjustment
[SKINTON
E LVL]
To set the level of outline
suppression performed by
setting [SKINTONE
DTL]. 1 (low suppression)
- 6 (high suppression)
[WB
SHIFT]
–7 (to make picture bluish)
to +7 (to make white parts
reddish)
Continued ,