To Next PageTo Next Page
Need help?Do you have a question about the Sony HXR-NX5C and is the answer not in the manual?
General| Camera Type | Professional Camcorder |
|---|---|
| Effective Pixels | 1920 x 1080 |
| Optical Zoom | 20x |
| Image Stabilization | Optical SteadyShot |
| Recording Format | AVCHD |
| Video Resolution | 1920 x 1080 |
| Sensor Size | 1/3" |
| Lens Type | G Lens |
| Focal Length | 4.1 to 82mm |
| Maximum Aperture | f/1.6-f/3.4 |
| LCD Screen | 3.5-inch |
| Viewfinder | 0.45-inch |
| Recording Media | Memory Stick PRO Duo, SD/SDHC |
| Frame Rate | 60i, 24p |
| Audio Recording | 2-channel PCM |
| Input/Output | HDMI, USB |
| Battery | NP-F570 |
Notes to check before servicing the unit, including power supply and component replacement precautions.
Records changes made in different versions of the service manual.
Detailed technical specifications for English models (PAL and NTSC).
Detailed technical specifications for Japanese models (NTSC).
Method to prevent power shut-off during repairs using a regulated power supply.
Precautions regarding destination data, USB serial save, and serial number input.
Table listing error codes, symptoms, and corresponding corrections.
Explanation of the self-diagnosis function and its displays.
Description of the 4-digit self-diagnosis display format.
Table listing self-diagnosis codes, symptoms, and correction methods.
Follow the disassembly in the numerical order given for parts identification.
Notes regarding standardized parts, items not stocked, and component units.
Notes regarding repair parts, standardized parts, and component units.
Exploded view of the overall section of the camcorder, showing part numbers and assembly order.
Step-by-step instructions for disassembling the overall section.
Instructions for disassembling the main board section, including screw types.
Instructions for disassembling the chassis section, specifying screw types.
Details of screw types used in the cabinet (L) section 1.
Safety precautions for battery replacement and notes for specific board installations.
Details of screw types used in the cabinet (L) section 2.
Notes regarding assembly of specific boards and switch adjustments.
Details of screw types used in the cabinet (R) section.
Details of screw types used in the handle section 1.
Instructions for disassembling the handle section 1.
Details of screw types used in the handle section 2.
Notes regarding harness and flexible board installation.
Details of screw types used in the handle section 3.
Details of screw types used in the handle section 4.
Note regarding the bending of the speaker grille during assembly.
Details of the screw type used in the EVF section.
Notes on diopter adjustment lever and imager replacement.
Details of screw types used in the LCD section.
Note regarding arranging harnesses for the LCD section.
Details of the screw type used in the microphone section.
Details of screw types used in the lens section.
Notes on harness disconnection and prism device cautions.
Details of screw types used in the BT panel section.
Notes regarding SDI cable connection and disconnection.
Notes on standardized parts, items not stocked, and safety-critical components.
Step-by-step assembly procedures for various units like VF Lens Assy, Harnesses, Speaker Grille.
Schematic diagrams showing the physical layout and interconnections of the camcorder's main blocks.
Notes on capacitor, resistor, and chip part notations and handling.
Notes on unleaded solder, circuit board patterns, and component markings.
Important precautions to follow when replacing the camcorder's imager.
Printed wiring board layout for the GC-012 board, side A.
Printed wiring board layout for the TC-001 board, side A.
Printed wiring board layout for the VF-179 board, side A.
Schematic diagram for the VC-582 board, showing regulator connections.
Schematic diagram for the VC-582 board, detailing camera control circuits.
Schematic diagram for the VC-582 board, showing camera control circuits.
Schematic diagram for the VC-582 board, illustrating focus and zoom motor drive circuits.
Schematic diagram for the VC-582 board, showing manual focus ring input circuits.
Schematic diagram for the VC-582 board, illustrating steadyshot processor circuits.
Schematic diagram for the VC-582 board, showing connections between various boards for lens drive.
Schematic diagram for the VC-582 board, detailing power circuits and regulators.
Schematic diagram for the VC-582 board, showing power regulators for audio circuits.
Schematic diagram for the VC-582 board, detailing the DSP co-processor and various interfaces.
Schematic diagram for the VC-582 board, showing mobile-DDR SDRAM connections.
Schematic diagram for the VC-582 board, showing power regulators.
Schematic diagram for the VC-582 board, detailing PCI processor connections.
Schematic diagram for the VC-582 board, showing mobile-DDR SDRAM connections.
Schematic diagram for the VC-582 board, detailing serial interface transmitter and display interface.
Schematic diagram for the VC-582 board, detailing the DSP co-processor and various interfaces.
Schematic diagram for the VC-582 board, showing HDMI transmitter connections.
Schematic diagram for the VC-582 board, showing power regulators.
Schematic diagram for the VC-582 board, showing power regulators for audio circuits.
Schematic diagram for the VC-582 board, showing power circuits and regulators.
Schematic diagram for the VC-582 board, showing DC control circuits.
Schematic diagram for the VC-582 board, detailing camera control interfaces.
Schematic diagram for the VC-582 board, showing camera control circuits.
Schematic diagram for the VC-582 board, illustrating focus and zoom motor drive circuits.
Schematic diagram for the VC-582 board, showing manual focus ring input circuits.
Schematic diagram for the VC-582 board, illustrating steadyshot processor circuits.
Schematic diagram for the VC-582 board, showing connections between various boards for lens drive.
Schematic diagram for the VC-582 board, detailing power circuits and regulators.
Printed wiring board layout for the GC-012 board, side A.
Printed wiring board layout for the TC-001 board, side A.
Printed wiring board layout for the VF-179 board, side A.
Printed wiring board layout for the GY-022 board, side A.
Printed wiring board layout for the CP-004 board, side A.
Printed wiring board layout for the MA-459 board, side A.
Printed wiring board layout for the HG-001 board, side A.
Printed wiring board layout for the CK-218 board, side A.
Printed wiring board layout for the AS-063 board, side A.
Printed wiring board layout for the HP-156 board, side A.
