Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Cnt Shoot Speed Boost
You can temporarily change the continuous shooting speed during continuous shooting. By quickly changing the
continuous shooting speed according to the situation, you can shoot only decisive moments in high-speed continuous
shooting and reduce the number of shots in other scenes.
[Cnt Shoot Speed Boost] can only be used when the drive mode is set to [Cont. Shooting].
Setting item details
120 images/s
60 images/s
30 images/s
20 images/s
15 images/s
10 images/s
5 images/s
Hint
[Cnt Shoot Speed Boost] can also be used while the shutter button is pressed halfway down or during continuous shooting.
If you use [Cnt Shoot Speed Boost] during continuous shooting, the playback group will be divided before and after the
continuous shooting speed boost.
In [Reg. Custom Shoot Set], you can register [Cnt Shoot Speed Boost] instead of the drive mode. In this case, the continuous
shooting speed can be set separately from [Cnt Sht Spd Bst Settings].
Note
If you use [Cnt Shoot Speed Boost] during continuous shooting and switch from a low speed to a high speed (60 images per
second or more) or from a high speed to a low speed (30 images per second or less), continuous shooting may be interrupted at
some point.
Related Topic
Cont. Shooting
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
MENU → (Setup) → [Operation Customize] → [ Custom Key/Dial Set.] → Assign [Cnt Sht Spd Bst w/
Hold] or [Cnt Sht Spd Bst Toggle] to the desired key and set the continuous shooting speed when using
[Cnt Shoot Speed Boost].
You can also set the continuous shooting speed in MENU → (Shooting) → [Drive Mode] → [Cnt Sht Spd
Bst Settings].
1
During continuous shooting, press the key to which you have assigned [Cnt Sht Spd Bst w/ Hold] or [Cnt
Sht Spd Bst Toggle], and then shoot the picture.
2
To Next Page
Loading...
