Sony MV-65ST - Displaying the Subtitles for DVD - SUBTITLE; Setting the Aspect Ratio for the TV Screen - TV SCREEN; Displaying the Multi-Angle Notice - ANGLE MARK; Preparing for the Initial Parental Setting - PARENTAL CONTROL

23
Displaying the subtitles for
DVD — SUBTITLE
If subtitles are recorded on the discs, you can
change the subtitles or turn the subtitles on
and off.
1 Press (SETUP), then press < or ,
button repeatedly until “DVD SETUP”
menu appears on the screen.
2 Press M or m button repeatedly to select
“SUBTITLE.”
3 Press < or , button repeatedly to
select the language, then press (ENTER).
When you have selected “OTHER,” press M
or m button repeatedly to select “SUBTITLE
CODE,” then enter the language code (page
37).
4 Press (SETUP) to exit the DVD SETUP
menu.
Note
Regardless of set ting to t he desired language,
other language may be aut omatically act ivat ed,
depending on t he DVD.
Setting the aspect ratio for
the TV screen — TV SCREEN
When you connect the player to a TV to watch
the DVD on TV screen, make this setting
according to the type of the TV screen.
1 Press (SETUP), then press < or ,
button repeatedly until “DVD SETUP”
menu appears on the screen.
2 Press M or m button repeatedly to select
“TV SCREEN.”
3 Press < or , button repeatedly to
select “4:3 PS,” “4:3 LB,” or “16:9,” then
press (ENTER).
4 Press (SETUP) to exit the DVD SETUP
menu.
Displaying the multi-angle
notice — ANGLE M ARK
If various angles (multi-angles) for a scene are
recorded on the DVD and you have set the
“ANGLE MARK” to “ON,” a notice appears at
the scene.
1 Press (SETUP), then press < or ,
button repeatedly until “DVD SETUP”
menu appears on the screen.
2 Press M or m button repeatedly to select
“ANGLE M ARK.”
3 Press < or , button repeatedly to
select “ON,” then press (ENTER).
4 Press (SETUP) to exit the DVD SETUP
menu.
To turn off the angle mark
Select “OFF” in step 3.
Preparing for the initial
parental setting — PARENTAL
CONTROL
Playback of some DVDs can be limited
according to a predetermined level, such as the
age of the viewer. The Parental control
function allows you to set a playback
limitation level.
This setting is possible only when a password
is entered as described in “Setting the
password” (page 24).
1 Press (SETUP), then press < or ,
button repeatedly until “DVD SETUP”
menu appears on the screen.
2 Press M or m button repeatedly to select
“PARENTAL CONTR.”
3 Press < or , button repeatedly to
select the limitation level, then press
(ENTER).
4 Press (SETUP) to exit the DVD SETUP
menu.
continue to next page t
Downloaded from: https://www.usersmanualguide.com/