Sony MV-65ST - Setting the FM Transmitter; Setting the Blue Background Screen; Exiting the Menu Operation

29
Setting the FM transmitter
When using the player in the car, you can
transmit the audio signals to the FM radio and
output the signals from the car stereo. Do the
procedure below to turn on or off the FM
transmitter and select the frequency.
1 Press (MENU) on the monitor repeatedly
until the “FM Transmitter” appears.
2 Press (VOL) +/ – on the monitor to select
“On” or “Off.”
The default setting is “On.”
3 To select the frequency, press (REVERSE)
on the monitor.
“Frequency” screen appears.
4 Press (VOL) +/ – on the monitor to select
the frequency.
The settable range is 88.3 MHz to 89.9 MHz,
in 0.2-MHz steps.
5 Press (REVERSE) on the monitor to
return to “FM Transmitter” screen.
When 5 seconds elapse with no button
pressed, normal display resumes.
Notes
• If headphones are connected t o the player, FM
transmitt er f unct ion does not work even when
“ On” is selected.
• Depending on the location in w hich this player is
att ached, FM signals may not reach t he car radio
and audio out put f rom t he car st ereo may
become interrupted. If this happens, adjust the
posit ion of t he FM transmission antenna or move
the recept ion ant enna of the car radio closer t o
the player.
• If noise is heard due to t he int erference with t he
local FM broadcast , change t he FM transmission
frequency.
• When t he FM t ransmit ter is turned of f, you
cannot change the f requency sett ing.
Setting the blue background
screen
When this item is set to “On,” the blue
background screen appears when no video
signal is received.
1 Press (MENU) on the monitor repeatedly
until the “Blue Back” appears.
2 Press (VOL) +/ – on the monitor to select
“On” or “Off.”
The default setting is “Off.”
When 5 seconds elapse with no button
pressed, normal display resumes.
Exiting the menu operation
1 Press (MENU) on the monitor repeatedly
until the “M enu Off” appears.
2 Press (MENU) on the monitor again.
The normal screen resumes.
When 5 seconds elapse with no button
pressed, normal display resumes.
Downloaded from: https://www.usersmanualguide.com/