9
Installing the player in the car
The player can be installed in the car by using
the supplied mounting straps.
1 Attach the angled hook on each of the
supplied mounting straps to the four
brackets at the bottom of the player.
2 Attach the round hooks to the car.
Be sure to hook the player to steady objects
such as the headrest shafts of the seat or the
seat rails.
When you attach the player to the center
console, secure the round hooks to the
bottom edge of the console.
3 Take in the slack of the belts to secure
the player.
Example w hen the player is attached behind
the seat
Example w hen the player is attached betw een
the seats
Example w hen the player is attached to the
center console
When the player is attached to the center console
• When picture noise appears or the sound
dropouts occur due to vibrations f rom t he car,
place a cushioning mat erial under the player.
• If a gap exist s bet ween t he top of the cent er
console and t he bot tom of the player, fill the
gap w ith a mat erial w ith optimum thickness so
that the player becomes st able.
continue to next page t
To the car
To the player
Round hook Angled hook
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
