Sony MXD-D3 - Page 29

29
5. ISRC DISPLAY
Procedure:
(1) Enter the test mode, then rotate [ AMS ] (CD) knob to display “4> IRSC”, and press the [ AMS ] (CD) knob.
(2) Rotating the [ AMS ] (CD) knob counterclockwise displays higher-order 5 digits, or clockwise displays lower-order 7
digits.
(3) To exit from this mode, press x (MD) button and [ AMS ] (MD) knob simultaneously.
6. CHECK 8 cm DISPLAY
Procedure:
(1) Enter the test mode, then rotate [ AMS ] (CD) knob to display “5> CHECK 8”, and press the [ AMS ] (CD) knob.
(2) To check the disc size (8 cm or 12 cm), the value is displayed.
(3) To exit from this mode, press x (MD) button and [ AMS ] (MD) knob simultaneously.
7. PORT SELECTION
Procedure:
(1) Enter the test mode, then rotate [ AMS ] (CD) knob to display “8> PORT”, and press the [ AMS ] (CD) knob.
(2) Rotate the [ AMS ] (CD) knob to select GFS, ERROR RATE, RFCK and press the [ AMS ] (CD) knob to set.
(3) To exit from this mode, press x (MD) button and [ AMS ] (MD) knob simultaneously.
lL
lL
lL
lL
lL
lL
lL
lL
lL
lL
lL
lL