Sony MZ-R70 Analog PCLink User Manual

15-GB
Note
Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital
(optical) input.
• when the source is in shuffle or program play mode while recording using
digital (optical) input. In this case, play the source in normal play mode.
• when recording BS or CS programs through digital (optical) input.
Recorded track
numbers
Marked (copied)
automatically
• at the same
positions as the
source.
• after more than 2
seconds of blank or
low-level
segment
1)
.
• when the recorder
is paused while
recording.
You can erase
unnecessary marks
after recording.
(“Erasing a track
mark”, page 43).
Marked automatically
• after more than 2
seconds of blank or
low-level segment.
• when the recorder is
paused while recording.
You can erase
unnecessary marks after
recording (“Erasing a
track mark”, page 43).
Recorded sound
level
Same as the source.
Can also be adjusted
manually (Digital
REC level control)
(“Adjusting the
recording level
manually
(Manual recording)”,
page 21).
Adjusted automatically.
Can also be adjusted
manually (“Adjusting the
recording level manually
(Manual recording)”,
page 21).
1)
When recording a CD or an MD, track numbers are automatically marked in
the order of the original disc.
Difference Digital (optical)
input
Analog (line) input

Sony MZ-R70 Analog PCLink Specifications

General

Brand	Sony
Model	MZ-R70 Analog PCLink
Category	CD Player
Language	English