41-GB
On the remote control
There is no display window on the remote control. Menu items
should be viewed in the display window on the recorder.
1 While the recorder is stopped, press EDIT for 2 seconds or more
so that “EDIT” flashes in the display, and then press ENTER
(x).
“ :Name” flashes in the display.
2 Press .or >N repeatedly until “ :Erase” flashes in
the display, and then press ENTER (x).
“Erase OK?” and “PushENTER” appear alternately in the
display.
To cancel erasing, press EDIT for 2 seconds or more, or press
T MARK.
3 Press ENTER (x).
“TOC Edit” flashes in the display and all the tracks will be
erased.
When erasing is complete, “BLANKDISC” appears in the
display.
To Next Page
Loading...
Need help?
General