Sony PVM-A250 - Bezel Assembly

1-8 (E)
PVM-A250
1-4-5. Bezel Assembly
. Remove the rear cover. (Refer to Section 1-4-1.)
7 Nine screws
(BVTP3 x 10)
Conductive cushion
CN004
CN4006
CN7000
Conductive cushion
1 Clamper
8 Main frame
assembly
9 Remove the H1 board. (Refer to Section 1-4-6.)
0 Remove the speaker. (Refer to Section 1-4-7.)
!- Remove the H2 board. (Refer to Section 1-4-8.)
!= Bezel assembly
H2 board
6 Harness
2 Wire saddle
5 Two harnesses
Upper side
Upper side
3 Two nylon rivets
4 Conductive tape
(BTM)
Serial No.7000001 to 7001869: PVM-A250 (SY)
Serial No.7200001 to 7200148: PVM-A250 (CN)