19(E)
Page Menu Submenu Control item Function
Paint 3 Knee Point z R/G/B/Master Adjusts the knee point.
Knee Off Turns the knee ON/OFF.
Knee Slope z R/G/B/Master Adjusts the knee slope.
Knee Off Turns the knee ON/OFF.
Matrix Matrix 1 z R-G/G-B/B-R Adjusts the matrix coefficients.
User Matrix Turns the user matrix ON/OFF.
Preset Matrix Turns the preset matrix ON/OFF.
Matrix Off Turns all the matrixes ON/OFF.
Matrix 2 z R-B/G-R/B-G Adjusts the matrix coefficients.
User Matrix Turns the user matrix ON/OFF.
Preset Matrix Turns the preset matrix ON/OFF.
Matrix Off Turns all the matrixes ON/OFF.
Multi Matrix z Phase Adjusts the multi matrix phase.
z Hue Adjusts the multi matrix hue.
z Sat Adjusts the multi matrix saturation.
Matrix Gate Turns the multi matrix gate ON/OFF.
Multi Matrix Turns the multi matrix ON/OFF.
Matrix Off Turns all the matrixes ON/OFF.
All Clear Clears all the matrix settings.
Paint 4 Gamma/Knee z Gamma Adjusts the master gamma.
z Blk Gamma Adjusts the master black gamma.
z Knee Point Adjusts the master knee point.
z Knee Slope Adjusts the master knee slope.
Gamma Off Turns the gamma ON/OFF.
Knee Off Turns the knee ON/OFF.
Knee Saturation z Knee Point Adjusts the master knee point.
z Knee Slope Adjusts the master knee slope.
z Level Adjusts the knee saturation.
Knee Off Turns the knee ON/OFF.
Knee Sat Turns the knee saturation ON/OFF.
Low Key Saturation z Level Adjusts the low key saturation level.
Low Key Sat Turns the low key saturation ON/OFF.
White Clip z R/G/B/Master Adjusts the white clip.
White Clip Off Turns the white clip ON/OFF.
Paint 5 Detail 1 HD
a)
z Level Adjusts the HD detail level.
z Limiter Adjusts the HD detail limiter.
z Crispening Adjusts the HD detail crispening.
z Level Dep Adjusts the HD level dependence.
Detail Off Turns the HD detail ON/OFF.
SD DTL Off Turns the SD detail ON/OFF.
SD
a)
z Level Adjusts the SD detail level.
z Limiter Adjusts the SD detail limiter.
z Crispening Adjusts the SD detail crispening.
z Level Dep Adjusts the SD level dependence.
Detail Off Turns the HD detail ON/OFF.
SD DTL Off Turns the SD detail ON/OFF.
a) The submenu to select HD or SD is displayed only when an HD camera is connected.
To Next Page
Loading...
