1
Turn on the console and insert the disc ( page 15).
Follow steps 1 to 4 of “Starting a game”.
The track numbers are displayed.
2
Using the directional buttons, select the track number you want
to play and then press the button.
Playback begins.
Notes
• If you turn on the console after inserting a disc, the track numbers are
displayed automatically.
• You can also start playback from the Browser screen ( page 35).
Caution
To play an audio CD recorded in DTS format, you must connect a device
with a DTS decoder to the DIGITAL OUT (OPTICAL) connector ( page
12). Note that an extremely loud noise may be emitted if the device does not
have a DTS decoder or if it is connected to the AV MULTI OUT connector.
Playing a CD
Playing an audio CD
Audio CDs
Using the directional buttons, select the icon for the desired track and
then press the button.
Operating the CD player during playback
20
Playing an audio CD
Icon (button*) Function
. (L1 button) Go to the beginning of the current or previous track
m (L2 button) Fast reverse
M (R2 button) Fast forward
> (R1 button) Go to the beginning of the next track
N (START button) Start playback
X (START button) Pause playback
x (SELECT button) Stop playback
* You can operate directly by pressing the buttons of the Analog Controller
(DUALSHOCK
®2).
Note
You can also use the DVD Remote Control (for PlayStation®2) (sold separately).
1
Using the directional buttons, select
x
and then press the
button.
Playback stops. Press the A (open) button on the console front to
remove the disc.
Ending audio CD playback
To Next Page