Here's how to use this VCR as the playback VCR and
another VCR as the recording VCR.
Before you st'art:
• Press DISPLAY to delete the on-screen display.
m
II.
_o
_o
€1
i_m . .
• How to edit:
Turn on the recording VCR and insert a blank
cassette.
2 Insert a source cassette into the playback VCR.
3 Locate the playback start point and select the
playback pause mode on the playback VCR.
4 Locate the recording start point and select the
recording pausemode on the recording VCR.
5
Press II PAUSE on both VCRs.
For best results, press II PAUSE on the playback VCR
just before pressing II PAUSE on the recording VCR
When you've finished editing, press • STOP on both
VCRs.
NOTES:
• If your recording VCR is a stereo unit, make
connections with the VCM-910MS/920MS cable (nOt
supplied).
• When connecting the VCRs, do not connect them so
that both are used as a recording VCR and a playback
VCR simultaneously.Doing so may cause a humming
noise.
Advanced Operation I 43
To Next Page
