Sony SLV-SE600A - Page 23

Getting Started
23
Setting the clock
Tips
• If you set AUTO ADJUST to ON, the Auto Clock Set function is activated whenever the
VCR is turned off. The time is adjusted automatically by making reference to the time signal
from the station whose programme position is displayed in the “CLOCK PROGRAM” row.
If you do not need the Auto Clock Set, select OFF.
• If you want to return to the previous menu, highlight RETURN and press OK.
Note
• The menu disappears automatically if you don’t proceed for more than a few minutes.
4
Press M/m to highlight ON, then press OK.
5
Press m to highlight CLOCK PROGRAM,
then press OK.
6
Press M/m repeatedly until the programme
position of the station that carries a time
signal appears.
If the VCR does not receive a time signal
from any station, AUTO ADJUST returns
to OFF automatically.
7
Press MENU to exit the menu.
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
CLOCK
ON
1 AAB
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.8THU8:00
12 .20009
OK
PLAY
CONFIRM :
SELECT :
OK
MENUEXIT :
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
THU 8 : 0 0
8.
1 AAB
21.20009
OK
PLAY
CONFIRM :
SELECT :
OK
MENUEXIT :
CLOCK
AUTO ADJUST
CLOCK PROGRAM
MANUAL ADJUST
.2000 THU 8 :00
8. 9
2 CDE
21
MENU